Four brighter, living-room-sized Magcubic projectors with 900 to 1200 ANSI lumens: how the official specs separate them and which room each suits.
Prices and availability checked on 2026-10-25; they may change.
See Magcubic projectors
Magcubic is best known for small, inexpensive projectors, but the company also lists a brighter home-theater tier. The four models here all state native 1080p, Android-based smart software and automatic keystone correction, with brightness figures between 900 and 1200 ANSI lumens, noticeably above the brand's mini projectors.
Brightness matters most in rooms that cannot be fully darkened. The differences between these four are throw ratio, screen size range and extras such as speakers and obstacle avoidance.
Magcubic lists the M800 at 1200 ANSI lumens, native 1920 x 1080 with 8K input compatibility, auto focus, automatic four-corner keystone correction, obstacle avoidance and screen recognition. It runs Android 14 with 2 GB RAM and 16 GB storage, has Bluetooth 5.4, a 15W speaker and a 1.0:1 throw ratio for images up to 140 inches. Price: $230.99 (against $299.00).
Measure the throw distance before you compare lumens.
The HY450MAX lists 1100 ANSI lumens, auto focus and auto keystone, a 1.0:1 throw ratio and 35 to 135-inch images, running Android 14. It is $215.99 (against $458.99 list). The HY450GT also states 1100 ANSI lumens with a 1.0:1 throw ratio, but extends the stated image size to 40-140 inches and lists a 10000:1 contrast ratio against 2000:1 on the MAX page. It is $245.99 (against $399.99).
Contrast figures from manufacturer pages are not directly comparable to real-world picture quality, so treat them as spec-sheet data only.
The HY450 has a 0.6:1 throw ratio, which lets it sit close to the wall and project 50 to 200 inches. It lists 900 ANSI lumens, two 5W speakers, Wi-Fi 6, Android 14 and electronic focus. At $184.12 (against $245.68) it is the lowest-priced model here, and the most relevant if your shelf is only a short distance from the screen wall.
Measure your throw distance first. A 1.0:1 projector needs roughly one foot of distance per foot of image width, while the 0.6:1 HY450 needs much less. Then decide how much ambient light you have: the M800 has the highest stated brightness. Finally, check the plug variant (EU, US or AU) before ordering.




| Model | Price (checked) | Brightness | Throw ratio | Image size | Extras |
|---|---|---|---|---|---|
| M800 | $230.99 | 1200 ANSI | 1.0:1 | Up to 140 in. | 15W speaker, obstacle avoidance |
| HY450MAX | $215.99 | 1100 ANSI | 1.0:1 | 35-135 in. | Auto focus, Android 14 |
| HY450GT | $245.99 | 1100 ANSI | 1.0:1 | 40-140 in. | 10000:1 stated contrast |
| HY450 | $184.12 | 900 ANSI | 0.6:1 | 50-200 in. | Wi-Fi 6, 2 x 5W speakers |
The M800 lists 1200 ANSI lumens, the highest of these four.
The HY450 has a 0.6:1 throw ratio, so it can sit closer to the wall than the 1.0:1 models.
The pages state native 1080p resolution with 8K input compatibility, so the image is not native 8K.
No. They are the prices on the checked date and the pages show higher list prices; confirm at checkout.
PickNexo has not tested these products hands-on; this article summarises official information and reputable reports. Some links are affiliate links, which may earn us a commission at no extra cost to you. Affiliate disclosure